On May 9, 2022, Oregon adopted two permanent rules, 437-002-0156 and 437-004-1131, designed to protect workers from the dangers of extreme heat caused by weather. Rule 437-004-1131 applies to agricultural workplaces, while 437-002-0156 governs all other industries. Both rules exempt indoor environments with mechanical ventilation systems maintaining a heat index below 80°F (26.6°C). These regulations, which use the heat index as a guiding metric, aim to prevent heat-related illnesses such as heat exhaustion and heat stroke, while also reducing risks of workplace accidents related to heat stress.
The heat index combines air temperature and relative humidity to represent how hot it feels to the human body. Oregon OSHA’s heat safety rules apply when the heat index reaches 80°F (26.6°C) with stricter measures enforced at 90°F (32.2°C) or higher. This proactive approach ensures workers are protected under varying heat conditions.
Employers are required to provide shaded areas when the heat index equals or exceeds 80°F (26.6°C), ensuring workers can cool down during breaks. Shade must be ventilated, located close to work zones, and large enough to accommodate all employees on rest or meal breaks. If providing shade is not possible, such as during high winds or mobile work, alternative cooling measures must be implemented that provide the same level of protection.
Employers must supply enough cool or cold drinking water for each worker to consume at least 32 ounces (946 ml) per hour. Acceptable alternatives like electrolyte-replenishing drinks may supplement water but cannot replace it entirely. Employers can begin shifts with less water if reliable procedures are in place to restock supplies as needed.
Training is a cornerstone of the heat safety rules. Employers must conduct annual sessions for all staff in a language employees fully understand, covering:
Employees performing “rest” or “light” work under 90°F (32.2°C) are exempt from training requirements but must still be aware of general heat safety provisions.
When the heat index exceeds 90°F (32.2°C), additional high-heat protocols are mandatory and employers must implement additional safety measures:
Workers can combine regular check-ins, panic buttons, and worker-down features within an employee safety monitoring app. These apps can be downloaded directly to a smartphone, eliminating the need for staff to carry additional devices. Packed with safety features like GPS locations and timed activity check-ins, these apps, like Ok Alone, provide an extra layer of protection for staff who need it most.
Employers are required to have an emergency medical plan for responding to heat illness. This plan must include:
In severe heat illness cases, such as disorientation or unconsciousness, supervisors must act immediately to ensure the employee’s safety, including offering on-site first aid or arranging emergency medical care.
Acclimatization is critical for reducing the risk of heat illness, especially for new employees, those returning after absences, or workers during heat waves. Employers must provide gradual exposure to high temperatures, allowing workers to adjust over a 7–14 day period. This process helps workers build tolerance to heat, which can be lost after only a week of non-exposure.
The best way to help workers acclimatize can be done by following established guidelines from the National Institute for Occupational Safety and Health (NIOSH) or creating a tailored plan.
In response to rising temperatures, some employers have adjusted work schedules, particularly in agriculture. By starting shifts earlier, workers spend less time in peak afternoon heat, reducing the likelihood of heat stress. This practice aligns with best practices for managing worker safety in extreme heat.
Oregon OSHA’s heat illness prevention rules establish a comprehensive framework to protect workers from the hazards of extreme heat. By emphasizing access to shade, adequate hydration, mandatory training, emergency preparedness, and acclimatization, these regulations provide employers with clear guidance to reduce health risks and promote safer, more productive workplaces. As climate conditions increasingly challenge traditional practices, these rules reflect a strong commitment to worker safety, ensuring proactive measures are in place to mitigate the dangers of heat-related illnesses.
For official documentation from Oregon Department of Consumer and Business Services and OSHA see:
https://osha.oregon.gov/OSHAPubs/factsheets/fs91.pdf
https://osha.oregon.gov/pages/topics/heat-stress.aspx
https://osha.oregon.gov/OSHARules/div2/div2J.pdf
As an expert in lone worker content management, I possess an extensive knowledge base and experience in the area of lone working and safety monitoring. My expertise in this field encompasses a wide range of areas, including risk assessment, training, communication, and technology. I have a deep understanding of the unique risks associated with lone workers and have researched and written many projects and articles to educate people in how to mitigate these risks.
Throughout my time with Ok Alone, I have kept up to date with technological developments, legislative changes and regulations that have been introduced to help organizations ensure the safety of their lone workers.
This post was last modified on December 10, 2024 3:58 pm
We are always looking for better ways to explain how Ok Alone works. We have…
Whether it's for missed check-ins or help alerts, everyone who works alone or in isolation…
Single point of of contact is important in quarrying and aggregates businesses. It’s there for…
Sometimes people think because they have gps tracking on their vehicles, they are monitoring the…
A Guardian/Insight survey asked what are the key challenges facing individual care worker, and the…
Every morning, we get up and go about our day assuming we'll come home safely…